How to Lay Engineered Wooden Flooring
People who decide that they want to have new floors installed in their home are looking at engineered wooden flooring. The reasons are simple: they are cost effective and so easy to install that anyone can pretty much do it! It may sound tricky to some, but installing these floors is really easy, once you know how to do it correctly. No special skills are needed to get the job done. For most people, it only takes a few days to get everything finished. They end up saving money, enjoying the work, and having something to show their craftsmanship and be proud of.
Get What you Need
The first thing that you should do is to take measurements and make calculations of everything that you need. Make sure that you find the right boards and decide if you want to nail down the floor or glue it down. For most people, they decide to glue the boards down as it is easier and usually yields just as good, if not, better results. The next step is to make sure that the floor that you are going to be laying the new planks on is ready. Get it cleaned, fill major holes, repair crevices, and make the floor as smooth and even as possible. Learning how to lay engineered wooden flooring is not only about laying the planks out, but more of learning how to make the finished project neat, flawless, strong, and visually appealing.
Where to Start with How to Lay Engineered Wooden Flooring
The first thing that you need to know about how to lay engineered wooden flooring is to be careful with the glue. There is a specific way to use it and you should closely follow directions about how to create the inlay and sticking them together. For instance, you should start by laying some glue out against the wall on the opposite side of the room at the door. Then, carefully place the boards and make sure that they are securely in place. Slowly and carefully start to work your way out from the wall until you get to the point where you can't work anymore without stepping on the boards you just laid. This is the time for you to leave the floor to dry overnight.
Day Two in How to Lay Engineered Wooden Flooring
After drying the laid boards from yesterday's work, it's time to make an early start and finish off the job you started. Since the boards have dried up overnight, it is safe to step on them lightly and carefully. Another part of learning how to lay engineered wooden flooring is mastering the art of pussyfooting- yes, you need to walk daintily over the newly dried boards if you don't want them ruined! Continue to lay the boards on the remaining floor space and secure everything carefully. Leave this second batch to dry.
Congratulations for a job well done! To make the board settle better, try to avoid stepping on the floor for at least 2 days for optimum drying results. You also need to avoid too much traffic over the newly laid floor and don't place any heavy objects over it too soon. If you want to be a master at how to lay engineered wooden flooring, you have to be patient and allow a lengthy drying time so you won't mess up the levels of the boards.
